![]() ![]() Measure the exhaust valve clearances while lifting-up the vehicle.Insert the thickness gauge (A) in as horizontal a direction as possible with respect to the valve stem end face.When arrow mark (A) on the cam sprocket (LH) comes exactly to the top, #1 cylinder piston is brought to the top dead center of compression stroke.ġ0) Measure the #1 cylinder valve clearance by using thickness gauge. (3) Remove the bolts, and then remove therocker cover (LH).ĩ) Set the #1 cylinder piston to top dead center of compression stroke by rotating crank pulley clockwise using ST. (2) Disconnect the PCV hose from rocker cover(LH). (1) Disconnect the spark plug cords from spark (3) Remove the bolts, and then remove the rocker cover (RH).Ĩ) When inspecting the #2 and #4 cylinders (2) Disconnect the PCV hose from rocker cover(RH). to IG(H4SO)-5, RH SIDE, REMOVAL, Spark Plug. ![]() ![]() (1) Disconnect the spark plug cords from spark plugs RH side. ![]() Inspection and adjustment of the valve clearance should be performed while engine is cold.ĥ) Disconnect the ground cable from battery.ħ) When inspecting the #1 and #3 cylinders Most people are not going to have the "feel" to be that accurate however. It is all in the service manual, available here. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |